Click on the icon in the infographic below for more information regarding a specific sensor.
Infographic Edge Facilities
  • More

    Dust Sensor

    Dust sensor
    When dust accumulates into equipment, power usage increases due to the harder working fans and CPU's running at higher temperatures. The Dust Sensor monitors dust particles in the air.

    Dust Sensor

    Close
  • More

    Power Quality Monitoring

    Dust sensor
    The quality of power is one of the main reasons causing equipment to fail, data to be lost or shortening life span of electronics. All impacting business operations. This sensor is able to detect up to 85% of all power quality issues. Plug & Play. No electrical work needed.

    Power Quality Sensor

    Close
  • More

    IO Dry Contact

    Dust sensor
    The dry contact input units enable you to hook up legacy equipment like generators, analog systems or other dry contact systems.

    IO Dry Contact Sensor

    Close
  • More

    Temperature & Humidity Monitoring

    Dust sensor
    The ambient temperature measurement checks if your cooling is still operating and if the room has the desired temperature setting. Combined with the humidity sensors, it ensures that your equipment is running within limits.

    Temperature & Humidity Sensors

    Close
  • More

    Airflow

    Dust sensor
    The airflow sensor monitors the operation of your air ventilation of your Edge facility: for the operation of the intake and outtake vents.

    Airflow Sensor

    Close
  • More

    Battery Monitoring System

    Dust sensor
    The battery monitoring system monitors the temperature, resistance and voltage of your cells. The string is monitored for its current and impedance.

    Battery Monitoring Sensor

    Close
  • More

    Water Leak & Ingress

    Dust sensor
    Water is the enemy of electricity. Inside remote offices or IDF rooms, water leak came come from multiple sources. The primary source is a leaking cooling unit. Then you have water leaks from tenants or rooms above your IDF room, street flooding, pipe bursts and many more. The leak sensor by ServersCheck is a 6m water leak sensitive cable so that it can detect water intrusion anywhere in the IDF or office room.

    Water Sensing Sensor & Cable

    Close
  • More

    Thermal Camera Sensors

    Dust sensor
    Thermal runaways of equipment will go undetected with traditional temperature sensors as air conditioning units will try to compensate the heat problem. The thermal camera sensor looks at the equipment and monitors its surface temperature in 4800 points, every 2 seconds.

    Thermal Camera Sensor

    Close
  • More

    PM Particle Sensor

    Dust sensor
    Dust accumulation in equipment will affect the reliability of systems. At first power usage will increase due to the harder working fans and CPU. Electrical issues may occur due to shortage caused by particles.

    Particle Matter Sensor

    Close
  • More

    Power Failure

    Dust sensor
    Power failure is a common reason why edge facilities go offline. Too often the PDU's do not have the built-in alerting capabilities like with LTE or Satellite connectivity. This sensor ensures that you know when there is an AC power failure so that you can take action before it's too late.

    Power Failure Sensor

    Close
  • More

    CO2 & VOC gas sensors

    Dust sensor
    Li-ion fires are preceded by gas venting of battery cells. Typically this stage gives a few minutes warning before batteries produce smoke and the fire starts. The gas being monitored for Li-ion is CO2.

    CO2, VOC & Temperature Sensor

    Close
  • More

    Corrosive Gas Sensors

    Dust sensor
    Corrosive gasses may be present in the outdoor air. Through ventilation they may get into your facility. H2S & SO2 gasses are known to corrode electrical and electronic equipment resulting in an environmental risk for your facilitiy. NOx & VOC form another danger to your facility.

    Corrosive Gas Sensing

    Close
  • More

    Refrigerant Gas Leaks

    Dust sensor
    Refrigerants are often used in Edge facilities. Using our R-gas sensor, leaks can be detected to mitigate the risk from a failing refrigeration and cooling system.

    Refrigerant Gas Sensors

    Close
  • More

    Daisy Chain Temperature & Humidity Sensors

    Dust sensor
    ASHRAE recommends 6 temperature sensors per rack. Others like Gartner recommend a minimum of 3 temperature sensors per rack: 2 on the intake side (top & bottom) and 1 one at the top back (outtake).

    The daisy chain temperature (humidity) sensors are designed to solve the limitations of standalone sensors

    Daisy Chain Temperature Sensor

    Close
  • More

    Grounding / Earthing Sensor

    Dust sensor
    This sensors checks non stop the grounding's resistance. This allows you to get early warning on your grounding system.

    The sensor detects following:
    - accidental disconnected grounding systems
    - corrosion of copper ground bars due to environmental conditions
    - copper ground theft

    Earthing / Grounding Sensor

    Close