Daisy Chained Temperature & Humidity Sensor
for data center white spaces

non-relevant transparent gif
key sensor features
Plug & play sensor designed for monitoring temperature & humidity inside racks and hot/cold aisles in data center white spaces.

no pc required for the ServersCheck to operate once configured - measures temperatures -55°C to +125°C (-67ºF to +257ºF)
- a resolution of 0.02°C
- with a ±0.5% accuracy from 0°C-50°.
- measures relative humidity between 10% and 90%.
- with a ±2% accuracy.
- only 1 IP address required for every 20* sensors.
- more than 100m/330ft with optional DAISY-BOOSTER.

- compact plug & play sensor.
- designed for indoor use.
- steel enclosure for non-power sensors. custom color options available.
- industrial grade.
- 0u rack, DIN rail, magnetic or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit.
- alerts via SNMP Traps, email or SMS.
- wired or optionally wireless.
- integrates via Modbus TCP, SNMP.

- optional MQTT integration - requires a different firmware of the BASE-WIRED.
- Modbus RTU RS-485 hardware versions available for specific sensors enabling direct integration with your own gateway & controllers.
- for other sensors, integrates over RS-485 is available using the optional Modbus RTU module.

- Gas and Thermal Imaging sensors require the optional BASE-FW-SSLS firmware addon to operate.
non-relevant transparent gif
Designed for monitoring hot & cold aisles
With this unique daisy chained sensors, data center operators can now start monitoring their racks at a lower cost of ownership compared to most wired and wireless solutions.

Using just one base unit and one IP address, up to 20 temperature & humidity sensors can be deployed inside your racks. Following ASHRAE standards, this means that with one single base unit you can monitor humidity for up to 20 racks.
Daisy chained temperature & humidity sensors for hot and cold aisles
non-relevant transparent gif
Designed for rack monitoring
Daisy chained temperature & humidity sensors inside a data center
With this unique daisy chained sensors, data center operators can now start monitoring their racks at a lower cost of ownership compared to most wired and wireless solutions.

Using just one base unit and one IP address, up to 20 temperature & humidity sensors can be deployed inside your racks. Following ASHRAE standards, this means that with one single base unit you can monitor humidity for up to 20 racks.
non-relevant transparent gif
No wireless & no battery problems
Wireless technologies like Zigbee suffer from unstable connections due to interference from Wifi and LED lights. Connectivity issues also drain batteries resulting in down time and an increased total cost of ownership.

With the daisy chained sensor you won't face radio or batteries issues: the sensor is connected using a wired cable connection and is powered by the base unit.
No wireless sensors
non-relevant transparent gif
How It works.
Illustration showing the operation of the InfraSensing daisy chained temperature sensor


The DAISY-STARTER sensor connects to the the base unit. *Up to 20 additional DAISY-THUM sensors can be connected to the DAISY-STARTER using simple RJ45 CAT5/6/7 cables. This makes the device an ethernet based temperature sensor to monitor temperature and humidity inside racks or inside the hot & cold aisles of a data center. Integrates with BMS platforms using the Modbus TCP protocol. Or with NMS systems through SNMP GET and SNMP TRAPS.